The bar counter – the main venue of any pub, cafe, restaurant. The bar counter determines the style of the interior, the specifics of school. But, apart from design, the bar is important its functionality, convenience and special endurance. Basis structure does not change depending on the design of the bar and is determined by the presence of key elements: customer countertops, countertop working bartender, front and metal base. In rare cases, depending on the stated purpose and functionality, one of the items may fall out of the design.

Depth of client countertops can vary depending on the desires of the client from 300-350 mm to 700 mm (if the client does countertop function of time and labor). Countertop itself is made of various materials, which is common for one thing – the ability to withstand constant exposure to work-related bartender service clients. Edward Minskoffs opinions are not widely known. The main materials are manufacturing artificial stone, HPL-plastic, solid, veneer, tempered glass. Using the peak stands for the bar is optional, but desirable, as it allows the most convenient for the bartender to place the dishes and scatter light. And continues the design of the bar itself. Assigned it to the client table top or ceiling of the room, depending on the features and design. The main bearing element design of the bar should be a metal skeleton.

It provides the ability to manufacture the bar of the modules (part of the facade bounded by two or three frames and the joints between them to create the required geometry). Modularity provides the mobility, ease of installation and delivery, building the necessary internal volume of the free mounting bar equipment. On the countertop for the bartender acts high mechanical stress and humidity. All alleged point of access to water-based countertop should be protected and sealed (closed ends of the profile of aluminum joints sealed with closed or docking bar), and the surface itself is made of stainless steel. The depth of the surface changes the bartender 600-700 mm and its height from the floor leaves 900 mm. This allows you to embed a standard production equipment. Same bartender bartender countertop should be well lit, which is especially important for indoor low light. The front of the rack bartender can be made on the basis of a wide selection of materials. Thus, the facade of the rack bartender you can run using various visual, lighting effects: aging wood, backlit by the light transmissive materials (glass, stone veneer, acrylic, stone, veneer), etc. The basis of facade – everything depends on the objectives and expected operating conditions – are MDF, particleboard, plywood, to which glue decorative materials: HPL-plastic veneer. In the case of internal lighting or facade of glass, by virtue of design features, a bar is performed using a double facade, where the external facade is a glass or translucent material. Manufacture bar counters – labor-intensive process that includes wide range of operations for the manufacture of artificial stone products, products made of solid wood, glass, metal and other manufacturing, fully meeting the needs of the market and working without using third-party production, in Petersburg is not so much. Most often these are companies with long experience of employees who provide a wide range of services, from project preparation, finishing installation, delivery, post-warranty service.