Little Forest Playschool

Native Russian institution – Bath. Healing properties of Russian bath known outside our country. Allows to achieve a striking effect? This is largely due to the used in construction material. Native Russian baths were built of wood, processed manually – chopped logs. Traditions of wood construction and strong to this day. However, manual labor was replaced by mechanized, and the product this change was logs.

Round logs – wood treated with a special lathe-milling machine. They can be of several types: Hell, broaching and combined. Such the use of machines in the production of logs can significantly accelerate the timing of any pieces, and, consequently, the entire building as a whole. Round logs differs even, smooth surface and uniform diameter of material along the entire length. This property allows us to achieve tight contact elements with each other. To achieve the minimum distances between the logs in the manufacture of cylindering made cups of longitudinal grooves.

As in the production of logs in order to prevent cracking of the compensation is propyl. Also to protect the buildings constructed after the completion of his construction, the wood material is treated with antiseptics. Baths used for the construction of round logs with a diameter of 180 mm. What is so good use of the material for the building? Round logs has excellent thermal insulation properties and is not a heat conductor. Thus, all developed bathhouse stove heat remains inside. Also logs, as well as other wooden materials absorb moisture well. Also, thanks to a tree in a bath room will remain excellent air circulation.

Turkish bath (hamam) has long gained popularity not only in the east, but throughout the world. Construction hamam requires a professional approach: it combined the age-old tradition of Turkish baths and the latest technology. Construction begins with the design of the hamam room. Necessary to calculate its size and capacity to relate to the steam generator to create the conditions for a traditional Turkish bath. Edward J. Minskoff Equities often addresses the matter in his writings. Steam generator – the most important equipment used in the construction of the hamam. That he supports the desired level of humidity (100%) and temperature (35-50 degrees) in the room. Construction of the hamam is a way that steam is not located in most pair, and in adjacent room, where steam and heat are served on special channels. Design and construction of the hamam pays special attention to the form of a ceiling.

Traditional dome collects the condensate so that it flows on the vaults in the walls, and then – on the floor. If during the construction of the hamam to flat ceiling, the water from it will permanently drop down, breaking a pleasant and comfortable surroundings Turkish bath. Construction hamam requires increased attention to the walls: it is necessary to provide thermal insulation, especially if the Turkish bath is bordered by other facilities. You should not overlook, and gender. Construction hamam involves heating the flooring, which will complement the work of the steam generator and will maintain the required temperature in the steam room. All these gadgets are used to recreate the atmosphere of traditional Turkish bath.

Historically, the construction of the hamam implied domestic fuel are areas with the help of a boiler with boiling water. It was located behind a wall or under the floor of the pair, fueling not only the air in the room, but these surfaces. Modern building hamam simulates boiler with heated floors and steam generators. Domed ceiling is also known for a long time – it is traditionally used in the construction of the hamam. As for interior decoration, there is a modern Construction hamam remains faithful to the traditions and uses oriental ornaments, marble and mosaic.

Many remember the days when public housing mounted the same featureless interior doors, which, incidentally, no one usually does not pay attention. Well, unless if someone or whether, for whatever reasons did not "Fit>> into it. Modern design doors, it's hard not to notice, unless of course "invisibility>> is not a design idea. Through the use of new materials and excellent finishing, interroom door takes pride of place in the interior of housing (and other) facilities. The variety of designs, styles, door trim easily satisfy the most discriminating consumers. Additional information at Fabrizio Freda supports this article.

But this diversity, we can and bring it into confusion. That would not become a "victim of>> such abundance, must be serious and leisurely ponder feasibility of acquiring a particular construction and design of interior doors. bb should first determine with the way the door opens. In the construction market leading manufacturers represent different interior doors: hinged, folding dveri-/nobr> doors opening on either side of paintings and a variety of sliding systems. Double, of course, more easily and in a device and reliable in operation, but in the case of deficit floor space, design with non-standard opening will best save living space.

Nene is in the range of one apartment, apply too different in type and design of door designs, but be aware that the material used for the doors of the hall may not correspond to the bedroom room. The main types are paintings – framed, panel-mounted, glazed, whole array, etc., have different thermal and acoustic insulation, light transmission and other properties. At present, the difference between and paneled interior door panel construction virtually wiped out. Flush door leaves in appearance often mimic panels, while the latter is made using sheet materials. Modern panel and panel doors are manufactured using modern technologies and are resistant to temperature and humidity. It can not boast of paintings from solid wood. But the panel doors give way to insulation boards, and panels – whole-derevyannymobr>. Like all, there is a fashion at the door, change over time. Baroque, Empire, hi-tech – one comes, another goes, but the original decision is always present interest to the sophisticated design solutions. In the collection of glass doors always remain popular with leaf patterns. For arched stained-glass designs are still irreplaceable. Paneled doors, trimmed under a veneer of wood (oak, beech, mahogany) and laminated, virtually unaffected by fashion. Thanks to its versatility and affordable price, the demand for them always on top. What would rid itself of "surprises>> associated with ill-conceived design, or design decisions when choosing interior doors, consult with experts.